LAST EDITED ON Nov-01-01 AT 03:00 PM (GMT)Here's what i've got:
4 computers on an ethernet network using TCP/IP
all plugged into a hub.
IPs are all 192.168.123.XXX (I'll change this to better numbers after I get this problem solved)
all subnets = 255.255.255.0
SMC Barricade (firmware 1.92e) plugged into hub and connected to a 56K Sportster external modem.
Can ping everything.
Use AOL (sorry) as ISP.
Barricade settings are:
Primary setup:
LAN IP Address = 192.168.123.254
WAN Type = Dial Up Network
Dial-up telephone = local phone number for AOL
dial-up account = my AOL screen name
dial-up password = blank
Primary DNS 0.0.0.0
Secondary DNS 0.0.0.0
Maximum Idle time 300 seconds Auto-reconnect = not checked
Baud Rate = 57600 bps Disable auto-dial = not checked
Virtual Server settings are all "empty"
Miscellaneous Items:
IP Address of DMZ host = 192.168.123.blank Enable = not checked
Remote administrator host = 0.0.0.0
Administrator Time out = 600 seconds Enable = not checked
Discard Ping from WAN side = not checked
Non-standard FTP port = 0 enable = not checked
DHCP Server
DHCP Server = Enable
IP pool starting address = 100
IP pool ending address = 199
Domain name = blank
System Status:
IP Address
WAN Status = 0.0.0.0 Sidenote Dial-up IP
Subnet mask
WAN Status = 0.0.0.0
sidenote = blank
Gateway
WAN Status = 0.0.0.0
sidenote = unreachable
Domain Name Server
WAN Status = 0.0.0.0
sidenote = blank
Connection Time
WAN Status = -
sidenote = blank
Dial-up Modem
Peripheral Status = dial-up fail
sidenote = Dial-up (button)
Printer
Peripheral Status = not ready
sidenote = blank
The Problem (finally)
I press the Dial-up button (on Status screen)
Modem dial tone
Modem dials
Hear handshake
Hear connection
Modem disconnects
This computer has an internal modem which connects and "holds" fine on the same phone line.
Can you help?
