DUX COMPUTER DIGEST

 

Site Search

Site Info

Home » Forums » Forum Archives » Networking and Internet Sharing » Topic # 1852

Irc dcc send and SMC7004ABR
ChAoTiC Apr-27-02 04:10 PM
hi, i'm a newbie in networking. I bought the smc7004abr last week and i upgrading to the last firmware.

all work great but i can't dcc send and i really don't know about trigger and all. If anyone can explain it it will be appreciated !!!

other question... i can make an ftp server with the virtual server but the client cant connect in pasv mode.

Does anyone know someting about it ??

Thanks


1. RE: Irc dcc send and SMC7004ABR
lbyard Apr-29-02 11:41 AM
In response to message 0
A search with the site search to left will produce a few posts, etc. on DCC. SMC has an FAQ on DCC and the ABR router at http://www.smc.com/index.cfm?action=support_tools_show_FAQ¬e_id=206. The answer to the ftp problem may be at http://www.smc.com/index.cfm?action=support_tools_show_FAQ¬e_id=212. Larry

2. RE: Irc dcc send and SMC7004ABR
ChAoTiC Apr-29-02 03:56 PM
In response to message 1
Thanks but i see this page and i don't know how to enter this port and in witch pages of the router's config pages. Please if someone can make an exemple ??

For the ftp, i found how to make it work il pasv mode and in active mode. In the vitual server page, i put the port 21 in private and public port in tcp for the ip adress of my ftp server.

In the Special applications pages, i put in the trigger port 21 tcp and in public port, i put a port range of 1000-1005 tpc and enable.

In the ftp server app (GuildFTPd) i put the wan ip address and the same port range in the router (1000-1005). Now my ftp works great in bot active and passive mode.

Now my problem is to configure for dcc in irc. I need some exemple.
Thanks. Sorry for my english... i don't write often in english...


3. RE: Irc dcc send and SMC7004ABR
lbyard Apr-30-02 12:00 PM
In response to message 2
I did it quite some time ago with an older Barricade model and do not recall the exact details, but they are in this forum somewhere. I do not have the time to set-it-up again. Larry

4. RE: Irc dcc send and SMC7004ABR
ChAoTiC May-29-02 10:48 AM
In response to message 0
I find how to make dcc to work fine. i will try to explain the best way i can but my english is not very well.

ok, in the mIrc configuration options :
in connection options:
- Default server port : 6667
click on advanced button
check the 2 checkbox and in the textbox "Binds socket to ip" write your external ip adress.

in connection local info :
- check the local host checkbox
- select the radio button server

in DCC options :
- DCC port first : 1024, last 1026
that's open 3 port for dcc connections

That's all for the mIrc.

In the router :
in the virtual server page, i open these port :
59 tcp 59
113 tcp 113
6667 tcp 6667
1024 tcp 1024
1025 tcp 1025
1026 tcp 1026

"private port" "type" "public port"

And i put the private ip of my pc where i want to use irc


5. RE: Irc dcc send and SMC7004ABR
lbyard May-30-02 02:12 PM
In response to message 4
Very good instructions. This question has been asked quite a few times. Larry

6. RE: Irc dcc send and SMC7004ABR
ChAoTiC Jun-06-02 07:11 PM
In response to message 5
Thanks

| Home | Guides | How to | Reviews | Online Store | FAQ | Forums | Forum Archives |
| Links | News | Newsletter | About Dux | Advertising | Contact Info | Privacy |