KT7 power up problem

I just installed an Abit KT7 motherboard in a new case (and power supply) for a friend. We have no power up at all, nothing, no PS fan, no nothing. I rechecked all connections, including the main ATX power plug to the board. My voltmeter is at work, so I could not verify if the power supply is putting out. Any ideas?
Thank you.

1. RE: KT7 power up problem
lbyard Jan-28-01 07:51 PM
In response to message 0

Check the manual (again?) and be sure the Power-on connector coming from the front panel is connected to the right pins on the motherboard header--a little hard to see clearly on the KT7. Believe I got it wrong with a KT7-RAID the first time. Look in our motherboard (http://duxcw.com/faq/mb/mb.htm) and power supply (http://duxcw.com/faq/ps/ps.htm) FAQs for additional steps. I just updated them. Larry