CDR101 Failure to read Error

After Creating Bootdisk from Win98 utility.
Recievd the CDR 101 "Failure to Read CDROM error"
CDROM has recieved the above failure.
Cleaned Lens, Changed CD, etc.
CDROM has "Cyberdrive 240D" label on drive
believe it's a Mitsumi 24x with obscure driver.sys
Visited site, followed directions. Leaving the following
config.sys and autoexec.bat listed below:

++++Config.sys++++

menuitem=CD, Start computer with CD-ROM support.
menuitem=NOCD, Start computer without CD-ROM support.
menudefault=CD,30
menucolor=7,0

device=C:\MTM\MTMCDAI.SYS /D:mscd001
device=himem.sys /testmem:off
device=oakcdrom.sys /D:mscd001

device=himem.sys /testmem:off

files=10
buffers=10
dos=high,umb
stacks=9,256
lastdrive=z
+++++Autoexec.bat+++++
@ECHO OFF

IF "%config%"=="NOCD" GOTO QUIT
c:\MSCDEX.EXE /D:mscd001
echo.
:QUIT
SET DIRCMD=/og /a /p
SET PATH=A:\
Anyhelp would be great........Pls assist.
Haven't touched DOS in......8+ years.

1. RE: CDR101 Failure to read Error
lbyard Apr-19-02 09:50 PM
In response to message 0

There are two CD-ROM drivers in the config.sys file. Larry