Go to Home Page GuidesHow to ArticlesReviewsForumsFrequently Asked QuestionsNewsLinksPotpourri

Site Search

 

Internet Connection Sharing Configuration
Last updated: 4/21/01

Q.  How do I set-up an SMC Barricade broadband router so I can do mIRC DCC file transfers?

A. With your browser connect to http://192.168.123.254/ (or whatever IP address you may have assigned to the Barricade), login, and click Special AP. Add the following line:
Trigger 59
Incoming Ports 1024-5000
Check Enable
Reboot
I tested mIRC 32-bit, version 5.82, using DCC to send and receive a file. It worked just fine with my SMC 7004BR Barricade with firmware version R1.92a.

Copyright, Disclaimer, and Trademark Information Copyright © 1996-2006 Larry F. Byard.  All rights reserved. This material or parts thereof may not be copied, published, put on the Internet, rewritten, or redistributed without explicit, written permission from the author.