[ Archive Contents | Old Forum | New Forum ]

Re: epox and S3 virge GX2

From: Larry
Date: 30 Nov 1999
Time: 11:15:21
Remote Name: 207.5.164.44

Comments

First you need to find the manufacturer of the video card. If you just have the board, it should have an FCC ID number on it. Plug that number into the FCC data base at: http://www.fcc.gov/oet/fccid/ to get the manufacturer. Use your favorite search engine(s) to (hopefully) find the manufacture's web site. Most manufacturers have a support section on their web sites where you may be able to download the appropriate drivers and, perhaps, a user manual/instructions. As a last resort, identify the chip (in this case S3's GX2) on the board and go to the chip manufacture's site (http://www.s3.com/index2.html) and download and install a generic driver for the chip. In most cases, but not all, the generic driver will work. Larry

| Home | Reviews | How to | From the Shop | Guides | FAQ | New Forum | Links |
|
ProductsServices | News | About | Advertising | Contact |
| Privacy Statement | Location |