[ Archive Contents | Old Forum | New Forum ]

Re: winNT w/Epox MVP3C

From: Larry
Remote Name: 207.5.164.44
Date: 06 Feb 2000
Time: 11:49:29

Comments

Jeff, I don't think the problem is NT-related at all. NT runs just fine on the Epox MVP3 boards. The problem is more than likely an internittant hardware problem. It looks like something is loose. Check the screws holding the motherboard to the case and be sure they are tight, making a good ground connection, but don't over tighten. Make sure there is nothing under the motherboard where it shouldn't be; e.g., a screw or stand-off shorting the board to the case. See http://duxcw.com/faq/mb/mb.htm for more trouble-shooting steps. You could have a bad motherboard. Larry

| Home | Reviews | How to | From the Shop | Guides | FAQ | New Forum | Links |
|
ProductsServices | News | About | Advertising | Contact |
| Privacy Statement | Location |